Fast Curing Liquid Mold Silicone Rubber 1:1 Mix

Fast-Curing Liquid Mold Silicone Rubber 1:1 Mix AB Liquid Mold Silicone Rubber Contact Ms. Chen at 13662816580 for inquiries

Molding Process Pour Molding: After uniformly mixing components A and B in proportion, pour the mixture into the mold by casting. This method is suitable for creating larger or relatively simple-shaped molds. 

Brush Coating Molding: For complex shapes or situations requiring mold creation on specific surfaces, the brushing method can be used. Apply the mixed silicone rubber evenly onto the prototype surface and then proceed with curing. Regardless of the process, vacuum degassing is typically required after mixing to prevent defects in the mold. 

Mold Making: Can be used to create molds for products made from materials such as plaster, wax, epoxy resin, polyester resin, polyurethane resin, and low-melting-point alloys. It is widely applied in industries like artificial leather high-frequency embossing, shoe upper and sole shaping, and arts and crafts. 

Electronic Encapsulation: Widely used in the electronics industry as a moisture-proof and insulating coating and potting material for electronic components, providing dustproof, moisture-proof, shockproof, and insulation protection for electronic elements and assemblies. 

Other Fields: Also suitable for making silicone products like cake molds, as well as product replication in industries such as ceramics, toys, and furniture.